dmesg - HP Pavilion dv6-6030er memory
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:05.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xce4b8000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcfd3f000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:00: [mem 0xfed61000-0xfed61fff] has been reserved
system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1e46 PNP0f13 (active)
system 00:06: [io 0x0400-0x04cf] could not be reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0680-0x06ff] has been reserved
system 00:06: [io 0x077a] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cdb] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xf0500000-0xf06fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf0420000-0xf043ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:06.0: PCI bridge to [bus 05]
pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf06fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:06: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:07: resource 18 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:07: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:07: resource 20 [mem 0xfed45000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18052K (ffff880035cae000 - ffff880036e4f000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Simple Boot Flag at 0x44 set to 0x1
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1395089117.308:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15490
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
pcieport 0000:00:07.0: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:03.0:pcie04: HPC vendor_id 1022 device_id 960b ss_vid 1022 ss_did 1234
pciehp 0000:00:03.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-03-17 20:45:18 UTC (1395089118)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000)
Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[57]: starting version 204
SCSI subsystem initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtsx_pci 0000:05:00.0: irq 45 for MSI/MSI-X
rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000c34000, 68:b5:99:df:af:b0, XID 0c200000 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: setting latency timer to 64
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf0708000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
libata version 3.00 loaded.
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.AGP_.VGA_.ATPX handle
ACPI: processor limited to max C-state 1
acpi-cpufreq: overriding BIOS provided _PSD data
pci 0000:00:01.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x164B).
[drm] register mmio base: 0xF0600000
[drm] register mmio size: 65536
ATOM BIOS: HP_Casablanca
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3967082 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
ACPI: AC Adapter [AC] (on-line)
[drm] Loading RS780 Microcode
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_pfp.bin
radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_me.bin
radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R600_rlc.bin
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd947c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800cd947c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
radeon 0000:01:05.0: setting latency timer to 64
hp_accel: laptop model unknown, using default axes configuration
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
== power state 0 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status:
== power state 2 ==
ui class: battery
internal class: none
caps: single_disp
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 1
power level 1 sclk: 20000 vddc_index: 1
status:
== power state 3 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 55000 dclk: 40000
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status:
== power state 4 ==
ui class: battery
internal class: uvd_hd
caps: single_disp video
uvd vclk: 40000 dclk: 30000
power level 0 sclk: 38000 vddc_index: 1
power level 1 sclk: 38000 vddc_index: 1
status:
== power state 5 ==
ui class: battery
internal class: uvd_sd
caps: single_disp video
uvd vclk: 40000 dclk: 30000
power level 0 sclk: 38000 vddc_index: 1
power level 1 sclk: 38000 vddc_index: 1
status:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: r
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:06:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.12-1-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
[drm] radeon: dpm initialized
ehci-pci 0000:00:13.2: setting latency timer to 64
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf0706000
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
acpi device:03: registered as cooling_device2
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input2
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: setting latency timer to 64
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf0704000
acpi device:0a: registered as cooling_device3
ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:02/input/input3
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci-pci 0000:00:12.0: setting latency timer to 64
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xf0709000
ACPI: [Package] has zero elements (ffff880212f4c540)
ACPI: Invalid active0 threshold
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: setting latency timer to 64
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xf0707000
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
lis3lv02d: 8 bits 3DC sensor found
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:16.0: setting latency timer to 64
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:16.0: irq 18, io mem 0xf0705000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:16.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m1024@0xf070a000 port 0xf070a180 irq 19
ata3: DUMMY
ata4: SATA max UDMA/133 abar m1024@0xf070a000 port 0xf070a280 irq 19
snd_hda_intel 0000:00:14.2: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90001e84b00). heartbeat=60 sec (nowayout=0)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/100
ata2.00: ATA-8: SAMSUNG HM320HJ, 2AK10001, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2992.506 MHz
usb 5-1: new high-speed USB device number 2 using ehci-pci
usb 5-1: New USB device found, idVendor=064e, idProduct=e258
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: HP TrueVision HD
usb 5-1: Manufacturer: SuYin
usb 5-1: SerialNumber: HF1016-A821-OV01-VH-R04.00.00
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP TrueVision HD
(064e:e258)
input: HP TrueVision HD
as /devices/pci0000:00/0000:00:16.2/usb5/5-1/5-1:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input10
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input11
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
ACPI: Power Button [PWRF]
Console: switching to colour frame buffer device 170x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
snd_hda_intel 0000:01:05.1: setting latency timer to 64
radeon 0000:02:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x103C:0x164B).
[drm] register mmio base: 0xF0400000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input13
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
usb 7-2: new full-speed USB device number 2 using ohci-pci
usb 7-2: New USB device found, idVendor=148f, idProduct=2000
usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-2: Product: CSR BS8510
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Switched to clocksource tsc
usb 7-3: new full-speed USB device number 3 using ohci-pci
usb 7-3: New USB device found, idVendor=138a, idProduct=0018
usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 7-3: SerialNumber: 2ae820475673
ATOM BIOS: HP/Flextronics
ACPI: Battery Slot [BAT0] (battery present)
wmi: Mapper loaded
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM320HJ 2AK1 PQ: 0 ANSI: 5
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE gen 2 link speeds already enabled
scsi 3:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[drm] Loading TURKS Microcode
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/TURKS_pfp.bin
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/TURKS_me.bin
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/TURKS_mc.bin
radeon 0000:02:00.0: firmware: direct-loading firmware radeon/TURKS_smc.bin
[drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
input: HP WMI hotkeys as /devices/virtual/input/input14
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021270ec00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021270ec0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002bb2118
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 50 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] ring test on 5 succeeded in 2 usecs
sd 1:0:0:0: Attached scsi generic sg0 type 0
[drm] UVD initialized successfully.
sr 3:0:0:0: Attached scsi generic sg1 type 5
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Internal thermal controller with fan control
== power state 0 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 70000 dclk: 56000
power level 0 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
power level 1 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status:
== power state 3 ==
ui class: battery
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
status:
== power state 4 ==
ui class: battery
internal class: uvd_hd
caps: video
uvd vclk: 70000 dclk: 56000
power level 0 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
power level 1 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status:
== power state 5 ==
ui class: battery
internal class: uvd_sd
caps: video
uvd vclk: 10000 dclk: 10000
power level 0 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
power level 1 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
status:
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status: r
[drm] radeon: dpm initialized
radeon 0000:02:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xE0374000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.34.0 20080528 for 0000:02:00.0 on minor 1
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 1:0:0:0: [sda] Attached SCSI disk
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
FS-Cache: Loaded
fuse init (API version 7.22)
lp: driver loaded but no devices found
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ppdev: user-space parallel port driver
platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[643]: starting version 204
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=none
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
rt2800pci 0000:04:00.0: firmware: direct-loading firmware rt2860.bin
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:21 by local choice (reason=3)
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:21 by local choice (reason=3)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=600
EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=600
EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware amd-ucode/microcode_amd.bin
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
[drm] Disabling audio 0 support
[drm] Disabling audio 0 support
PM: suspend of devices complete after 2500.734 msecs
PM: late suspend of devices complete after 0.173 msecs
pcieport 0000:00:07.0: System wakeup enabled by ACPI
pcieport 0000:00:04.0: System wakeup enabled by ACPI
ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 82.490 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
process: Switch to broadcast mode on CPU1
CPU1 is up
ACPI: Waking up from system sleep state S3
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at /build/linux-lq6CKI/linux-3.12.9/kernel/time/tick-broadcast.c:667 tick_broadcast_oneshot_control+0x177/0x180()
Modules linked in: cpufreq_powersave uinput ppdev parport_pc nfsd nfs_acl nfs lp parport lockd fuse fscache ext4 mbcache jbd2 edac_mce_amd edac_core dm_crypt dm_mod ctr ccm binfmt_misc auth_rpcgss oid_registry sunrpc sg sd_mod crct10dif_generic sr_mod cdrom hp_wmi crc_t10dif crct10dif_common sparse_keymap btusb bluetooth crc16 snd_hda_codec_hdmi joydev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media rtsx_pci_sdmmc rtsx_pci_ms mmc_core memstick kvm_amd kvm evdev psmouse serio_raw k10temp sp5100_tco i2c_piix4 snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer snd soundcore thermal wmi battery arc4 button video hp_accel lis3lv02d input_polldev ac rt2800pci eeprom_93cx6 rt2x00pci rt2800lib rt2x00mmio rt2x00lib acpi_cpufreq mac80211 processor thermal_sys ahci libahci ohci_pci ohci_hcd radeon xhci_hcd ehci_pci ehci_hcd i2c_algo_bit cfg80211 drm_kms_helper ttm drm usbcore r8169 rtsx_pci mii mfd_core rfkill usb_common crc_ccitt i2c_core shpchp libata scsi_mod
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12-1-amd64 #1 Debian 3.12.9-1
Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/164B, BIOS F.21 09/13/2011
0000000000000009 ffffffff8148be76 0000000000000000 ffffffff8105b582
0000000000000001 0000000000000001 ffff88021fc8dd40 0000000000000002
ffffffff81823340 ffffffff810b41c7 0000000000000004 ffffffff818a0fc0
Call Trace:
[] ? dump_stack+0x41/0x51
[] ? warn_slowpath_common+0x72/0x90
[] ? tick_broadcast_oneshot_control+0x177/0x180
[] ? clockevents_notify+0x1c8/0x1f0
[] ? amd_e400_idle+0x69/0x100
[] ? cpu_startup_entry+0xde/0x270
[] ? start_secondary+0x1d4/0x230
---[ end trace a85140bc9bef73c2 ]---
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
pcieport 0000:00:07.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 177.847 msecs
PM: early resume of devices complete after 0.087 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:01:05.1: setting latency timer to 64
pcieport 0000:00:04.0: System wakeup disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd947c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800cd947c0c
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: r
pciehp 0000:00:03.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
pciehp 0000:00:03.0:pcie04: Cannot add device at 0000:02:00
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021270ec00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021270ec0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002bb2118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb 5-1: reset high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
r8169 0000:03:00.0 eth0: link down
[drm] ib test on ring 5 succeeded
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status: r
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 7-2: reset full-speed USB device number 2 using ohci-pci
ata4.00: configured for UDMA/100
usb 7-2: device descriptor read/64, error -71
usb 7-2: device descriptor read/all, error -75
usb 7-3: reset full-speed USB device number 3 using ohci-pci
usb 7-2: reset full-speed USB device number 2 using ohci-pci
btusb 7-2:1.0: no reset_resume for driver btusb?
btusb 7-2:1.1: no reset_resume for driver btusb?
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 9566.710 msecs
PM: Finishing wakeup.
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:02: Restoring backlight state
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=0
EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: send auth to 04:da:d2:29:a9:21 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:21 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:21 (capab=0x431 status=0 aid=20)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 04:da:d2:29:a9:21 by local choice (reason=3)
cfg80211: Calling CRDA for country: DE
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware amd-ucode/microcode_amd.bin
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
[drm] Disabling audio 0 support
[drm] Disabling audio 0 support
PM: suspend of devices complete after 2516.434 msecs
PM: late suspend of devices complete after 0.177 msecs
pcieport 0000:00:07.0: System wakeup enabled by ACPI
pcieport 0000:00:04.0: System wakeup enabled by ACPI
ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 83.340 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
process: Switch to broadcast mode on CPU1
CPU1 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
pcieport 0000:00:07.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 177.831 msecs
PM: early resume of devices complete after 0.086 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:01:05.1: setting latency timer to 64
pcieport 0000:00:04.0: System wakeup disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd947c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800cd947c0c
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: r
pciehp 0000:00:03.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
pciehp 0000:00:03.0:pcie04: Cannot add device at 0000:02:00
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021270ec00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021270ec0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002bb2118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb 5-1: reset high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
r8169 0000:03:00.0 eth0: link down
[drm] ib test on ring 5 succeeded
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status: r
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
usb 7-2: reset full-speed USB device number 2 using ohci-pci
usb 7-2: device descriptor read/all, error -75
usb 7-3: reset full-speed USB device number 3 using ohci-pci
usb 7-2: reset full-speed USB device number 2 using ohci-pci
btusb 7-2:1.0: no reset_resume for driver btusb?
btusb 7-2:1.1: no reset_resume for driver btusb?
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 9608.511 msecs
PM: Finishing wakeup.
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:02: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: send auth to 04:da:d2:29:a9:22 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:22 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:22 (capab=0x431 status=0 aid=34)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware amd-ucode/microcode_amd.bin
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
[drm] Disabling audio 0 support
[drm] Disabling audio 0 support
PM: suspend of devices complete after 2500.769 msecs
PM: late suspend of devices complete after 0.171 msecs
pcieport 0000:00:07.0: System wakeup enabled by ACPI
pcieport 0000:00:04.0: System wakeup enabled by ACPI
ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 87.822 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
process: Switch to broadcast mode on CPU1
CPU1 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
pcieport 0000:00:07.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 177.637 msecs
PM: early resume of devices complete after 0.086 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
snd_hda_intel 0000:01:05.1: setting latency timer to 64
pcieport 0000:00:04.0: System wakeup disabled by ACPI
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cd947c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800cd947c0c
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: r
pciehp 0000:00:03.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
pciehp 0000:00:03.0:pcie04: Cannot add device at 0000:02:00
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021270ec00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021270ec0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002bb2118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb 5-1: reset high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
r8169 0000:03:00.0 eth0: link down
[drm] ib test on ring 5 succeeded
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
power level 2 sclk: 60000 mclk: 90000 vddc: 1000 vddci: 0
status: r
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
usb 7-2: reset full-speed USB device number 2 using ohci-pci
usb 7-2: device descriptor read/all, error -75
usb 7-3: reset full-speed USB device number 3 using ohci-pci
usb 7-2: reset full-speed USB device number 2 using ohci-pci
btusb 7-2:1.0: no reset_resume for driver btusb?
btusb 7-2:1.1: no reset_resume for driver btusb?
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 9582.272 msecs
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:02: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: send auth to 04:da:d2:29:a9:21 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:21 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:21 (capab=0x431 status=0 aid=55)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: send auth to 04:da:d2:29:a9:21 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:21 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:21 (capab=0x431 status=0 aid=55)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
wlan0: authenticate with 04:da:d2:29:a9:21
wlan0: direct probe to 04:da:d2:29:a9:21 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:21 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:21 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: direct probe to 04:da:d2:29:a9:22 (try 1/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 2/3)
wlan0: direct probe to 04:da:d2:29:a9:22 (try 3/3)
wlan0: authentication with 04:da:d2:29:a9:22 timed out
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: send auth to 04:da:d2:29:a9:22 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:22 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:22 (capab=0x431 status=0 aid=59)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 04:da:d2:29:a9:22 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 04:da:d2:29:a9:22
wlan0: send auth to 04:da:d2:29:a9:22 (try 1/3)
wlan0: authenticated
rt2800pci 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 04:da:d2:29:a9:22 (try 1/3)
wlan0: RX AssocResp from 04:da:d2:29:a9:22 (capab=0x431 status=0 aid=59)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000